Trophy Camera won’t power up

1. Make sure that you have installed at least 4 batteries in the battery compartment all stacked together at the top of the compartment.

  • Bushnell recommends 8 Energizer Lithium AA batteries in all Trophy Cams.

2. Make sure that the batteries are installed correctly. See manual.

3. When moving the switch from “Off” to “Setup” or “On”, the user should make sure that the switch stops in a positive position to ensure the proper mode.

4. When moving the switch from “On” to “Setup”, the user should first move the switch directly to “Off” before moving to “Setup”. 

Rate this FAQ:

Current rating: 2.5 (6 ratings)