Frequently Asked Questions

Q: Photos Do Not Capture Subject of Interest

A:

  • Check the “Sensor Level” (PIR sensitivity) parameter setting. For warm environmental conditions, set the Sensor Level to “High” and for cold weather use, set the sensor for “Low”.
  • Try to set your camera up in an area where there is not a heat source in the camera’s line of sight.
  • In some cases, setting the camera near water will make the camera take images with no subject in them. Try aiming the camera over ground.
  • Try to avoid setting the camera up on small trees that are prone to being moved by strong winds.
  • Remove any limbs which are right in front of the camera lens.

Rate this FAQ:

Current rating: 0 (0 ratings)