Frequently Asked Questions

Q: Field Scan (Time Lapse) not working properly

A: Make sure that the stop and start times of Field Scan "A" and "B" do not overlap. (for example, do not set the start time of "B" to 8AM if the start time of "A" is 10AM).

When Using Field Scan in Video Mode, the smallest interval time available is 5 minutes, to avoid potential overheating of the batteries and electronic components, which could cause operational failure or damage to the camera. In still photo mode a 1 minute interval can be set.

Rate this FAQ:

Current rating: 1.2 (6 ratings)